TONGDA TD736 Weaving Machine Rapier Loom for Curtain/Bed Sheet/Sari Cloth/ Ethnic Cloth Fabric
TONGDA rapier loom is new type modern non-shuttle weaving loom in which the filling yarn is carried through the shed of warp yarns to the other side of the loom by finger-like carriers called rapiers.
A stationary package of yarn is used to supply the weft yarns in the rapier machine. One end of a rapier, a rod or steel tape, carries the weft yarn. The other end of the rapier is connected to the control system. The rapier moves across the width of the fabric, carrying the weft yarn across through the shed to the opposite side. The rapier is then retracted, leaving the new pick in place.
In some versions of the loom, two rapiers are used, each half the width of the fabric in size. One rapier carries the yarn to the center of the shed, where the opposing rapier picks up the yarn and carries it the remainder of the way across the shed. The double rapier is used more frequently than the single rapier due to its increased pick insertion speed and ability to weave wider widths of fabric.
Main Technical Data:
A stationary package of yarn is used to supply the weft yarns in the rapier machine. One end of a rapier, a rod or steel tape, carries the weft yarn. The other end of the rapier is connected to the control system. The rapier moves across the width of the fabric, carrying the weft yarn across through the shed to the opposite side. The rapier is then retracted, leaving the new pick in place.
In some versions of the loom, two rapiers are used, each half the width of the fabric in size. One rapier carries the yarn to the center of the shed, where the opposing rapier picks up the yarn and carries it the remainder of the way across the shed. The double rapier is used more frequently than the single rapier due to its increased pick insertion speed and ability to weave wider widths of fabric.
Main Technical Data:
| Model | TD736 |
| Reed width (cm) | 180(74") 200(78") 230(90") 250(98") 280(110") 330(130") |
| Rotation Speed(RPM) | 190-300 |
| Yarn Range | Cotton:6Ne-80Ne,Wool:10Ne-135Nm,Chemical Fabric:900D-70D |
| Shedding Weft Insertion Form | Upper Mechanical(electronic)dobby,spring reversing motion, 20 or 24 shafts |
| Six Linkages Weft Insertion | |
| Beating-up Motion | Four Linkages Short Crank Arm Beating-Up |
| Take-up and Rolling-up | Continous take-up and separate rolling-up,full rolling diameter 400mm |
| Weft Selection | 4-6 colors |
| Diameter of Warp Beam | 600mm |
| Warp Stop | 6 rows electric warp stop |
| Weft Stop | Piezoelectric Ceramic Sensor Control Weft Stop |
| Electric System | PLC |
| Power | 1.8-2.2KW |
| Weight | 3200-3500KG |
| Overall Size | 3700x2000x1800(200cm/78'') |
Detailed Specification:
Advantage:
1.Capable of making 3 Sacking fabrics of 23" 127" width (Twill Weave) (B-Twill), (A-Twill) on each loom of 230cms R.S.
2.Flexible loom with Dobby arrangement, capable of also making Hessian (plain weave) on the same loom.
3.Much higher production per loom compared to S4A and conventional looms.
4.High Power Saving.
5.Reduced manpower as killed operator capable of hanđing multiple machines.
6.Lesser 25% f1oor area needed, thus saving space.
7.Air compressor and laying of pipe line not required for inserting weft thread as in case of S4A looms.
8.Smoother and much stronger selvedge due to Tuck-in system for higher seam strength.
9.Much better finish of fabric due to flat weaving instead of semi circular weaving of S4A looms.
10.Less Yarn wastage as there is no loop formation as in S4A looms.
11.Reducing working noise levels by 20% in the weaving shed.
12.Reduced dust polution in the working area due to modernized rapier technology.
13.Reduced Beam carrying between warping shed & looms.
14.Cam/Dobby/Jacquard shedding type optional, adapt to different cloth process requirements, TONGDA series numerical control electronic jacquard loom,800/1408/2688/5376 hooks number can choose.
Other Related Model:
2.Flexible loom with Dobby arrangement, capable of also making Hessian (plain weave) on the same loom.
3.Much higher production per loom compared to S4A and conventional looms.
4.High Power Saving.
5.Reduced manpower as killed operator capable of hanđing multiple machines.
6.Lesser 25% f1oor area needed, thus saving space.
7.Air compressor and laying of pipe line not required for inserting weft thread as in case of S4A looms.
8.Smoother and much stronger selvedge due to Tuck-in system for higher seam strength.
9.Much better finish of fabric due to flat weaving instead of semi circular weaving of S4A looms.
10.Less Yarn wastage as there is no loop formation as in S4A looms.
11.Reducing working noise levels by 20% in the weaving shed.
12.Reduced dust polution in the working area due to modernized rapier technology.
13.Reduced Beam carrying between warping shed & looms.
14.Cam/Dobby/Jacquard shedding type optional, adapt to different cloth process requirements, TONGDA series numerical control electronic jacquard loom,800/1408/2688/5376 hooks number can choose.
Other Related Model:
| Nominal Reed Width (cm) | 200~ 230 | 280 | 300~320 | 340~ 360 | 420 | |
| Maximum Speed (RPM) | TD788 | 210 | 170 | 160 | 140 | 110 |
| TD789 | 240 | 200 | 180 | 160 | 130 | |
| Shedding Device | Upper mechanical dobby with spring forced heald return | |||||
| Take Up Motion | Continuous mechanical take up | |||||
| Batching Motion | Independent mechanical batching motion, maximum cloth diameter 1000mm | |||||
| Let-off Motion | Oil bath active let-off mechanism, 680mm beam disk diameter (Optional beam disk diameter: 800mm) | |||||
| Warp Broken Stop | Automatic stop by 6-row warp broken sensor | |||||
| Weft Broken Stop | Automatic stop by weft broken sensor | |||||
| Color Selection | Dobby ( Electronic) control, 6 colors (Optional: electronic color selection) | |||||
| Motor Power | 1.5 KW/ 2.2KW | |||||
| Loom Operation | By control buttons on both sides of Loom | |||||
Packing and Shipping:
FAQ:
(1) Q: How's the after-sale service?
A: We offer engineers available to service overseas under merchandiser's supervision and translation.
(2) Q: Are you available for on-the-spot invitation?
A: We do welcome our new and old friends come here to have a visitation. Besides, we would send you our exposition and relative information to promote a face-to-face meeting if you'd like to.
(3) Q: Is the price offered changeable?
A: We offer reasonable price for every client, and the price is changeable according to purchasing amount.
(4) Q: How about the quality?
A: The main subassembly and raw materials are all supplied by large companies. Key parts are research and developed by our own staff. Professional assembly line work and strict quality test system can ensure your high quality requirement.
(5) Q: Are you a manufacturer or Trade Company?
A: We are a professional manufacturer holding our own International Trade Department, for that we can better understand customer's needs and offer a reasonable price.
Why Choose Our Company?
A: History: TONGDA Textile Machinery Group was establish in 1952. Now have more than 65 years old history.
B: Main Products: TONGDA Group specializes in design, manufacturing, and marketing of a wide range of Textile machinery, it has seven branch companies, mainly produces ring spinning frame, roving frame, weaving machine(water Jet loom/Air jet loom/rapier Loom),warping machine, quilting machine and nonwoven machine.
C: We provide design for complete line of spinning mill for cotton yarn, polyester yarn, wool yarn, flax/linen yarn, machines including blow room, carding machine, draw frame, roving frame, ring frame, winding machine, open end spinning machine and the air conditioning system and waste collection system for spinning mill.
We also provide workshop layout design and trench design, and air pipe layout design.
D: Product /Quality Guarantee: 1 year warranty for the International standard.
E: After Sale Serivice: We are work online 24 hours. If you have any questions about our machine you can contact us.
F: One-stop Service:
We have R&D department including more than 100 engineers which are improving and enlarging our supply range.
Export Memorabilia:
TONGDA 1988: TONGDA's 500 sets ring spinning machines was exported to Bangladesh.
TONGDA 1993: TONGDA's 385 sets spinning machines was exported to Pakistan.
TONGDA 1995: TONGDA's 229 sets spinning machines was exported to Bangladesh.
TONGDA 2002: Delivery 300 sets spinning machines to India.
TONGDA 2009: TONGDA's 100 sets water jet loom and air jet loom was exported to India.
TONGDA 2010: TONGDA once again exported 300 sets water jet loom and air jet loom to India.
TONGDA 2011: TONGDA exported needle punching nonwoven machine production line to south America and exported more than 500 sets water jet loom, air jet loom, rapier loom to overseas.
TONGDA 2012: TONGDA exported 200 sets spinning machine and 100 sets rapier loom to Tajikistan And once again exported 200 sets ring spinning machines to India.
TONGDA 2013: TONGDA exported 500 sets weaving machines to overseas and 50 sets nonwoven machines, 680 sets spinning machines to overseas including South Asia and Africa.
TONGDA 2015: TONGDA sold more than 1000 sets weaving machines, 100 sets nonwoven machines and 700 sets spinning machines to overseas including Europe, south America, and South-East Asia.
Certification:
TONGDA is an ISO9001, ISO14001, and ISO13485 company. The products are designed to meet the technical standards of 3C and CE. All the products are certified by the Industry Administration Authority. TONGDA will continue to strive to be a stronger leader in the global market of Cotton machinery and Spinning machinery.
Exhibition:
Welcome to inquiry:
