Textile Machines/Tenter Framers/Textile Finishing Machines

Introduction The Stenter Machine is used for cotton, chemical fiber and blended knitted and woven fabric open width padding auxiliaries, drying and styling process. According to the width of the fabric, we can offer the following models: FSLD-1600/1800/2000/2200/2400/2600/2800/3000/3200/3400/3600/3800/4000  T

Featured Products

Textile Machinery /Stenter Machine / Textile Finishing Machine
Introduction
 
The Stenter Machine is used for cotton, chemical fiber and blended knitted and woven fabric open width padding auxiliaries, drying and styling process.

 According to the width of the fabric, we can offer the following models:
 FSLD-1600/1800/2000/2200/2400/2600/2800/3000/3200/3400/3600/3800/4000
 The machine is equipped with horizontal rollers, the diameter is from 360mm to 400mm based on the machine width of 3000mm or wider.
 

Functions of Stenter Machines

  1. Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric.
  2. Width of the fabric is controlled by the stenter.
  3. Finishing chemical apply on fabric by the stenter.
  4. Loop of the knit fabric is controlled.
  5. Moisture of the fabric is controlled by the stenter.
  6. Spirility controlled by the stenter.
  7. GSM of the fabric is controlled by stenter.
  8. Fabric is dried by the stentering process.
  9. Shrinkage property of the fabric is controlled.
  10. Curing treatment for resin, water repellent fabric is done by the stenter.
Textile Machinery /Stenter Machine / Textile Finishing Machine
OriginChina
Main Matching Fabric open width fabric (70~350g/m²) made
of cotton, cotton/polyester,wool,synthtic fiber and 
other blended fibers
Heat sourcenatural gas/circulating conduction oil/steam
Stentering typehot air circulating
Holding typepin+clip
Chain typepitch 60mm,oil-free lubricated
Rail typecarbon steel+polymer wearing strip
Working typehorizontal return chain 
Working width1000-3600mm
Working speed5-60m/min
Chamber Nos2-12
Chamber width3000mm
Insulating board thickness150mm
Temperature of chamber100~220ºC
Pinning & brush overfeed ratio-20%~40%
Temp.& Breadth adjustment typeseparately adjust on each chamber
Capacity of machine61.5kw+22.75kw*chamber*Nos
Standard machine power supply380V/3P/50HZ
Control power supply220V/24V
Steam specification of steam box3-6kg/cm²
Steam comsuption of steam box100-150kg/h
Compressed air 0.35-0.6MPa
Total weight14T+5.8T/chamber*Nos
 
Textile Machinery /Stenter Machine / Textile Finishing Machine

Textile Machinery /Stenter Machine / Textile Finishing Machine

Textile Machinery /Stenter Machine / Textile Finishing Machine

Payment Terms

Payment Conditions30% down payment by T/T and the balance payment should be T/T or in irrevocable L/C at sight. 
Delivery time:90 days from the date of receiving down payment. All payment should be received before delivery in China.
 
Any questions and requirments,contact us now!
   
Textile Machinery /Stenter Machine / Textile Finishing Machine
 

 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours